PAC Car Radio Replacement Non-Amplified Interface Harness
Compatible with 2002-up Select Volkswagon
Provides CAN-based Navigation outputs
Retains safety warning chimes
Retains factory-installed amplifier
Direct plug-in for SWI module to retain steering wheel controls
12V ACC and illumination outputs
2009 - 2014 CC
2007 - 2012 EOS
2006 - 2014 GOLF
2002 - 2005 GOLF (MONSOON Audio)
2006 - 2014 JETTA
2002 - 2005 JETTA (MONSOON Audio)
2006 - 2014 PASSAT
2002 - 2005 PASSAT (MONSOON Audio)
2007 - 2011 RABBIT
2009 - 2014 TIGUAN
2004 - 2010 Touareg
2011 Jetta: Does not currently provide a reverse output trigger
2010+ Vehicles: The C2R-VW2 does not retain the digital amplifier in Dynaudio systems
2012+ Vehicles: The C2R-VW2 does not retain the digital amplifier in Fender systems
2002-2005 Vehicles: In these year vehicles the C2R-VW2 does not provide a Reverse output trigger. This signal is unavailable on the data bus.
You must be replacing a factory Double-DIN radio. If the vehicle came equipped with a Single-DIN radio, the C2R-VW2 is not compatible.
2004-2007 Touareg: Does not retain digital audio amplified system when the vehicles is equipped with factory navigation radio
Steering Wheel Control Notes:
We strongly recommend that vehicles equipped with SWC use the RP4-VW11
2002-2005 vehicles (excludes Touareg): Can only program volume up & down.
2006-2010 vehicles with Eight button SWC (excludes Touareg):
Can program volume up & down, phone button and star button without effecting Multi-Function Display (MFD).
Arrow up & down can be programmed but will control MFD.
2009-2010 vehicles with 12 button SWC (excludes Touareg):
Can program left hand side of steering wheel volume up & down, track left & right, phone and mute buttons without effecting MFD.
Arrow up & down on right side can be programmed but will control MFD.
2004-2010 Touareg: Can only program volume up & down
Authorized Internet Dealer
One-Year CNS Warranty: Inquire Within for Further Details